Greetings! So recently, i spent a few hours coding software. After i was done and i shut off my pc, i noticed both of the ethernet lights were on and blinking. Does this mean that Microsoft is sending data to their servers before the PC fully shuts off? I am scared that this might be the thing it does. How can i get rid of this issue? I have no idea if it’s related to Windows or the PC itself.
You must log in or register to comment.
Your PC network card keeps the connection up in order to receive wake on LAN requests.
Any link activity whilst the PC is shutdown is packets that were broadcasted to the entire network. Other PCs, DHCP requests, etc send traffic to all devices on the network. So seeing some traffic whilst it’s off is nothing to worry about.
the link light is powered by the switch. it doesnt [necessarily] mean data transfer
the link light is powered by the switch
No it’s not. If you don’t believe me, unplug your PC’s power cord and watch the light go out.
If the power cord is plugged in but the computer is shutdown, and the light is still on, then that means the network adapter supports WoL or OOB management and must stay on for that reason, but the network switch connected to the adapter is not physically powering any lights.
If the power cord is plugged in but the computer is shutdown, and the light is still on, then that means the network adapter supports WoL or OOB management and must stay on for that reason
Also worth noting that Windows is especially bad about actually shutting down when you tell it to shut down because something something fastboot. I’ve seen similar inconsistently on Linux but I strongly suspect that to be more edgecases with specific hardware and my install.
Fastboot shouldn’t affect networking as the hardware itself is powered off.
For cameras on some devices, the camera cannot be used without completing a circuit that turns on a light. I think they’re just stating the same is true for the ethernet port light.
Except neither of those things are true.
I don’t know enough about ethernet switches to know if this is common. Though, reading their comment again, I don’t really think I’m right about their statement. It’s definitely a light that is frequently designed to be on when packets are still being accepted for waking the computer.
I don’t have a background in CE, but I’ve seen people claim this is sometimes a design used in the past. I think it makes sense that a circuit that is controlled by the computer can be hard wired to turn on both a light and a ethernet port. Though, I don’t know how common this design is in reality.
edit: After searching some, it looks like some port lights can be controlled by a driver. I still think it probably depends on the hardware design though, and this won’t be consistent between ports.
sure it depends on the design, but no standards-compliant non-PoE Ethernet design is going to light up an LED, it barely uses 1 volt.
I think driver examples from the Linux kernel are very convincing evidence that the lights can be controlled entirely by software, but I’m interested to see any possible specific port designs where that isn’t true.
I was not refuting that, yes drivers can control the LED since forever. The original comment was “the link light is powered by the switch”, which I’m saying is not possible. An ethernet switch (assuming it’s not PoE) cannot directly power an LED on a network adapter in your PC let alone the rest of it, that’s all I’m saying.
False
You computer has a feature for Out of Band management. Either WoL as others have mentioned or vPro(Intel), iLon(HP), iDrac(Dell), as well a few other less popular systems depending on who makes your mainboard or NIC.
This leaves the power on to the network card so that it can be used even with your computer off. It does not have access to your normal computer in the this case. Just the ability to turn on/off the system and sometimes options to update BIOS/UEFI firmware and send a console image to either a client or browser.
The lights are blinking because broadcasts packets from other devices on your LAN are sent to every device. This is normal and expected behavior.
The lights are blinking because broadcasts packets from other devices on your LAN are sent to every device. This is normal and expected behavior.
Just building off of this, modern computers are chatty as heck and there’s just constantly little bits of chatter spamming out on LANs. This is normal and expected behavior
You got ghosts, bruh
He needs to install GhostBSD to defeat them.
If there’s something strange, in your network ports. Who ya gonna call?
Unfortunately Linux doesn’t have any anti-ghost packages as they’re much more common in Windows
ghostscript?
Ugh, can confirm.
As other said, it’s surely related to the LAN traffic and not the WAN traffic only your router sends some packets but it shouldn’t be Windows. Little tips if you don’t want telemetry and tracking, simply use Linux.
I dualboot both Windows and Linux. I use windows just for pyinstaller and compiling, while i daily drive Arch Linux with dwm.
Why windows for pyinstaller and compiling?
Well as you may know, when you try running pyinstaller on linux, it packs the .py file into a linux exectuable, not a windows executable.
Very interesting! Thanks for the heads up. I didnt know that. 7 years ago, they already used wine for that. https://stackoverflow.com/questions/44014390/how-to-generate-a-windows-executable-using-pyinstaller-on-linux#45065125
If all else fails you could also use a vm. Thats probably less dangerous than dual booting because of windows not playing nice with grub.
I dualboot both Windows and Linux using the BIOS’s boot menu. Linux installed on a seprate drive, windows on another.
Ok great!
use Linux
Had to be said, didn’t it?
And always use proper protection when surfing online
Right sorry
Yes.
Maybe but probably not. Its just frames coming in from the rest of the network. The device on the other end doesn’t know the computer is off.
Alternatively if the card still has power it might be just in the state Windows left it in. I could imagine it would be good to not have to reinitialize the card all the time.
Why are you concerned about telemetry on shutdown? That wouldn’t make any sense as it sends your data and checks the system status in the background while you use your computer. Also it is not great practice to totally shutdown at night as that’s the time when update happen. It also could theoretically wear out hardware but chances are that’s not a problem on newer machines
Its the other CPU in your cpu/nic
no Linux?
i noticed both of the ethernet lights were on and blinking
So usually one of the lights on the port indicates the link state (up/down and if its at full speed or a reduced speed) and the other light indicates data flow. Both lights blinking suggests either a really shoddy link state or an unusual implementation of status lights on the port. Do both lights blink while its booted and actively transferring a large file? Can you find documentation of how your device implements the indicator LEDs? (I can’t tell if that’s a dongle or a port on your computer)
I’m sure it’s legacy thing from back in the day, flashing means it’s sending or receiving, solid means it’s idle.
deleted by creator
I believe you can stop it by turning off a feature called “fast startup” or something like that.
disconnect ur pc from power physically if the behavior continues which i would guess it will its probably something connected to ur wifi doing something in a dumb way if it stops thats wierd as fuck but forcing the pc to shut down by holding the power button should do the trick since that usually tells the motherboard to tell the power supply to shut off and i dont think windows gets a say on that.
