I dusted off my RPI4 and started tinkering with self-hosting things and it’s sparked a fire. Suddenly I have 7 docker containers running and I need more RAM, more space and I want something reliable with room to grow. I like small form factors but it doesn’t need to be RPI small. Any recs for your favorite hardware under $500?
You must log in or register to comment.
I have a couple of Intel NUCs and they are great, one is the first generation NUC with the Celeron and runs Home Assistant without problems.
At the moment I am eyeing the new N100 CPUs they are pretty powerful compared to the previous generation. Asrock and Asus are bringing out motherboards with the CPU soldered and they are also fanless. The Asrock is nicer because you don’t need a real PSU for it and it has an extra SATA port. They are not yet available.
https://www.asrock.com/mb/Intel/N100DC-ITX/index.asp
https://www.asus.com/motherboards-components/motherboards/prime/prime-n100i-d-d4/
Planning on making an unRaid miniPC
NUCs are great if you can snag them on sale or for a good deal but they’re (somewhat) like Apple nowadays, paying the “NUC tax” imo. You can usually find other SFF with similar or better specs for cheaper on eBay. HP Prodesk (Mini) for example you can grab some extra RAM and a cheap SSD to max it out.
+1 for a NUC. There’s plenty of second hand ones on Ebay which can be had at around $100. The nice thing is that they have ultra low voltage CPUs so the power bill is not a concern with running 24/7.
The new N100 is also a 6W processor.
Neat, looks like RPi4 consumes around 6W at full load as well.
There are so many brands of these NUCs on Amazon it’s dizzying, it’s hard to know what’s reliable or just cobbled-together hardware. Should I just stick to the big names like ASUS or are there some diamonds in the rough?
Personally, I would stick with name brands in case something goes wrong. Asus is ok or you can get directly with Intel, they are the original creators. Before deciding to wait for a N100 motherboard I was looking at getting the Intel NUC13ANHi3 or the i5 version.
Intel NUC. Myself I prefer Proxmox as the first layer (so I can do stuff remotelly), and Alpine Linux VM as a second layer.
This been rock stable for me for the past 1 year or so.
What specs is yours if you don’t mind me asking? I have a 10th hosting Proxmox and 11th hosting ESXi, but both at 32GB. Wondering if I should take the plunge and just upgrade them both max out at 64GB.
NUCs are great little boxes. I have extensive experience with them. Not a lot of room for RAID or other nice to haves, but besides that even in some pretty bad environments they just happily sit there chugging away year after year.
The fan can get gummed up, but if your environment is at all reasonable it’ll probably not be a problem. OTOH, you can buy these massive fanless cases for a NUC that make the whole question moot.
I’ve replaced fan once. Purchased from Ali. Works like a charm.
The reason why I had to replace fan is because it is CCTV-Viewer host and the app is not using hardware acceleration (not supported). Lots of cameras, CPU is usually around 60-70% 24/7 and temperature usually never drops below 80°c. It’s expected in my case.
The other NUC is running 24/7 as media center/home server for the past 2 years and to this day works like a charm.
Do you run off a relatively new NUC or an older one?
This is pretty much exactly what I do. I’m partial to Debian though.
Wow, first I’m exposed to Proxmox, looks really cool. I’m currently handling remote via Cloudflare Tunnels and it’s working well but I’d love something that will manage multiple servers in the future and this looks like the ticket.
Well, this is not what I meant “remotelly” 😂. I realised I am too lazy to setup monitoring (Telegraf/VictoriaMetrics/Grafana) so I look into VM metrics in proxmox. Also I can reinstall VM remotelly if I fuck things up - very convenient.
Definitely a NUC or similar mini PC from the likes of Geekom, Beelink, or Minisforum. My whole homelab was mini PCs until I consolidated to a NUC 12 Pro as I build up my rack. Slap Proxmox on the machine, build some VMs and LXCs, and have at it.
Or HP/Dell units second hand. Tons of companies ditch those computers after two o three years and they’re still perfectly good for self hosting with Linux. We can also find really good deals on Intel 9th gen machines for around 35% of the price of all those you suggested brand new.
I am still quite happy with my old Sun Fire X2270 M2 with Dual Xeon X5675. Not new, but its 12 physical cores, 88 GB RAM and 4 hotswap SATA drive bays in a 1U rack unit make it quite a decent machine for running a couple of VMs.
I also like my Dell T320 Rackable Tower server. It has room for 8 hotswap 3.5" SAS drives (or 16 2.5"), redundant power supply, and you should be able to get it for under $300. With a Xeon E5-1428L V2, mine is still quite capable and uses between 140 and 160 W (with 8 disks).
Wow, that’s a ton of computing power for the money.
I’d recommend taking a look at used small form factor PCs on eBay. I’ve been using one for a couple years now that came with an i7-8700 16GB of ram and an nvme SSD for about $300. Running 30+ docker containers without any issues (most are lightweight to be fair)
The only drawback to small form factor is that you have limited expansion opportunity with the unit itself. In my case I use an external NAS for storage of larger files.
ServeTheHome has a bunch of videos on YouTube about these small form factor computers.
In my case I use an external NAS for storage of larger files.
What’s the advantage of using a NAS system?
I’m considering options for adding more storage right now and I’m not sure if I should just chuck some more drives in my linux server, or move up to NAS. The main downside of adding more drives is that I’m spending money without getting any more reliability (it’s just some drives and a SAMBA share, no RAID, and only ‘sometimes I remember to move important files to S3’ for backup. Conversely, with a NAS I’m spending an extra like $500 on hardware before I even add storage.
It would be nice to have some reliability, but I’ve never had NAS before, so it’s kind of an unknown for me, plus it seems like I could invest some time and add similar reliability/backup features to my existing system.
That’s why instead of getting a more higher spec mini PC I went with 3 cheaper ones to start a highly available cluster. More reliable, and room for expansion! Somewhat a pain to setup though.
I have some (refurbished) HP mini PCs that are pretty decent, you can probably find similar things well within that range. You could also consider an off-lease/used server in that price range, but will have to do some hunting to find something you like. Also, servers can be a bit loud and power hungry (the efficiency of the compute is lower than e.g. a mini PC or a Pi, but it will have way more compute. Servers with something like dual hex core CPUs and 64+ GB of RAM are not uncommon).
I run both mini PCs and server hardware, using the server hardware mainly for storage or services that need quite high availability (auth, reverse proxy, password vault) and the mini PCs for most everything else (minecraft servers, wiki, jellyfin, etc)
HP EliteDesk 800 G3 go for about 110€ on eBay in my area so they should have similar pricing in the US. Bought three of them and upgraded each one to 32GB of RAM and 1TB of NVME storage. They’re near silent and draw very little power which is perfect for me. I’ve set them up as a Proxmox cluster to host a bunch of VMs for messing around. I wouldn’t recommend them for applications that do video encoding though. Plex for example can bring one of these machines to its knees when you’re dealing with very large 4K Blu-ray rips like I am. In that case I usually just run Plex on my desktop when I need to.
HP EliteDesk 800 G3
Yep. I use one of these for all of my homelab stuff. The i5 7500 does everything I need it to do, including h265 QuickSync transcoding for Plex & tDarr.
Do you have the Mini one or the regular one? Because the fan in my Mini is kinda annoying even on low speeds. Now I wonder if it’s normal or if it’s broken somehow.
Sorry for the late reply, notifications weren’t working properly in my app.
Yes, I mean the Mini not the full-size desktop.
I used to run a Dell R710, but that got expensive with the electricity prices shooting up. So I moved to a standard consumer hardware PC in a rack mount case. Ryzen 5 5600, 64GB RAM, 500GB NVME, SSD boot disk, 6x 3.5" disks for storage. It uses half the power and is a fair bit quicker than the old dell with dual X5670 Xeons. One day I’ll move to just 2x larger disks instead of 6, but that’s expensive at the moment.
I totally get moving away from the dell. I’ve got one sitting in my rack now, and I’ve been thinking about getting a nuc or two as replacement to see if I can drop my power bill.
How much of a difference did you notice in your bill when downsizing?
It’s running at roughly half the power of the dell, which was at 220W idle. A lot of that will be the spinning disks, HBA card and 4 port intel NIC. A barebones system with just one ssd would be about 30W idle.
The NUCs are great but storage and networking are limited. I use Opnsense in a VM as my router so needed a few more ports. And the storage options on a NUC seem very limiting. Perfect for application servers, just not storage servers.
That’s about what I was expecting. Yours is running about 30W higher than mine, but that’s still a hell of a delta.
Thanks for the other points as well! NIC quantity will be an issue since I will be moving my esx over, but hopefully I can limp by on a single line and let VLAN tagging handle most of my mess. I’ve been running some of my VMs via iscsi storage, and it performs well enough for my uses at home.
At the moment hardware is just expensive. I ended up with a NUC with 32gb of ram in order to future proof myself while I wait for hardware to become cheaper. Other than another stick of ram I can’t see me needing to update any time soon.
Other than a very old laptop that acts as a DC, and my NAS, I have five Lenovo M920 (i5, 64 gigs of ram, 256 gigs SSD, and 512 gigs M2) in a XCP-NG cluster.
Im using refurbished thinkpads (x220-203) but i’ve seen a lot of homelabs using Nuc pc
Depends who you talk to and what their objectives are. I leaned heavier on homelab side than homeserver side so I use older rack mount server, but if you’re just interested in running some services at home, nothing wrong with NUCs or desktops. Most can get you over the 32-64GB of RAM level now that you’d have ample room for activity.
I bought a Dell R720 rack server for less then £300 and I use it to run a whole heap of virtual machines under ProxMox, as well as a load balancer. It has 2 8 core Xeon processors, 64GB of RAM and 2TB storage so more than enough for my needs.
Definitely not small form factor though :D
Keeping storage and compute separately is the best practice but if you’re OK with combining both in one device then running docker-compose on a Synology (via SSH, + versions only) works just fine. An alternative that reduces the lock-in at the expense of more tinkering is buying an amd64 QNAP and installing Openmediavault / TrueNAS / plain Debian.
Why is it superior to keep them separate, if you don’t mind me asking?
Not OP, but I’m running into some issues with my machine being both my “server” and my “NAS”.
The biggest downside is that if I want to update my storage, I will also have to update the server, and viceversa.
Sometimes the server goes down for whatever reason (e.g., distro update), and I lose access to the storage as well.
You can get some decent enterprise hardware for fairly cheap on places like amazon. I got a dell R710 for around $800 a couple of years back. The equipment tends to be a little scuffed up and older in terms of hardware, but they still offer plently of performance IMO. The one I have has a 6 drive RAID with 1.5TB disks, dual 6-core processors, and 128GB of ram. Only downside I would say is they tend to use quite a bit of power (around 207W from what I’ve measured).
The best resource imo for big home servers if you graduate using old PCs is the Homelab Discord server. They’re also at !homelab@lemmy.ml.
