This might be a dumb suggestion, but if your pump has a little lever on the head, maybe try flipping it? Each valve style needs the pin pressed in at a different depth, so if it’s set to shrader-style, it might not be seating properly on a presta.
Maybe try flipping it the other way? Idk I’m not an expert but for some reason my old pumps you flip the lever down 90° to lock it but on my newer pumps you flip it straight (so it’s pointing the same direction as the valve, towards the center of the wheel).
When using a new pump I just keep flipping it differently until it works, and I generally don’t have problems with presta. Not sure if some pumps make you flip it differently depending on the valve type - it seems like they all invent their own way to support both so it’s confusing.
I don’t do that. That might be a shrader thing, but I think it just bumps it off the presta valve. You also might need to open the valve all the way until it won’t turn anymore.
You can get a presta to schrader adapter that is a valve cover/cap. You just take it off, unscrew the valve all the way and then put the cap back on, and it works exactly like a schrader. I keep one on one of my presta valves so I can air up with any random pump in a pinch.
It’s just frustrating trying to figure out the exact amount you need to loosen the valve that it lets air in from standard bicycle pumps
okkkk, presta sucks and is unnecessary but that is not the case. You just loosen it all the way.
That would make sense, but when I open it all the way the air just won’t go in with my pump
This might be a dumb suggestion, but if your pump has a little lever on the head, maybe try flipping it? Each valve style needs the pin pressed in at a different depth, so if it’s set to shrader-style, it might not be seating properly on a presta.
I usually flip the lever to lock the head onto the valve, should I try not touching it next time I pump that tire?
Maybe try flipping it the other way? Idk I’m not an expert but for some reason my old pumps you flip the lever down 90° to lock it but on my newer pumps you flip it straight (so it’s pointing the same direction as the valve, towards the center of the wheel).
When using a new pump I just keep flipping it differently until it works, and I generally don’t have problems with presta. Not sure if some pumps make you flip it differently depending on the valve type - it seems like they all invent their own way to support both so it’s confusing.
I don’t do that. That might be a shrader thing, but I think it just bumps it off the presta valve. You also might need to open the valve all the way until it won’t turn anymore.
You can get a presta to schrader adapter that is a valve cover/cap. You just take it off, unscrew the valve all the way and then put the cap back on, and it works exactly like a schrader. I keep one on one of my presta valves so I can air up with any random pump in a pinch.