No need to bend the legs, no need to do wire stripping. I did this in 30 minutes casually… I guess the full halve will take around 1 hour

  • Ulys@lemmy.worldEnglish
    1·
    11 months ago

    Right! I can see how it would be fast then. “Just” tin all the pins, and when all the pins are tinned have your solder in a fixed position and then move your iron from solder to pin, stick the diode, and repeat. Cool!

    • humanplayer2@lemmy.ml
      1·
      11 months ago

      I soldered on things yesterday doing this, but not tinning the pins first. I fluxed them instead. Then I just picked up solder on the iron tip, used that.

      I don’t have much experience, so maybe this is too slobby, but for now, things are in place and connected.