Hazel
- 4 Posts
- 41 Comments
I absolutely love the color scheme!
1·10 months agoYeah, this shouldn’t be a problem at all. tzarc’s Djinn is an example of dual screens.
These are Chicago Steno caps that I had printed in MJF from JLCPCB.
crystal are 3pin, pro are 5pin
I use purpz on pinkies and thumbs, then silvers everywhere else. I can see how the 10gf differences between Reds and Silvers might not seem like a lot, but it was noticeable for me. There’s also the Pro Reds which are slightly lighter at 35gf. After that you’re into pink/purpz range which might be too light.
ditto. I read the BTS top to bottom.
Boards with surface mount diodes are most likely using 1N4148W SOD-123. I think there might be variations of the corne that don’t use surface mount diodes, so make sure the one you’re getting supports them.
Sadek, from fingerpunch, designs a unibody case for their Ximi board.
Corne is probably the top of my list for anyone that wants to get into ergo. They can be picked up from a lot of places and I think it has more users than any other ergo board, so finding support should be easy.
The Sofle is another popular board that would probably work well due to having more keys.
The Helix is a popular ortho split option.
If you’re lookin’ for something that is packed full of features, the Ximi from fingerpunch basically has it all.
Want to start off by saying that I really appreciate all the research you did (and relayed to us) while on your search. This helps us not just recommend a bunch of shit you’ve already looked at. A lot of the things you’ve listed as requirements somewhat disqualify a lot of the keyboards we usually see/use around these parts.
While reading through your post, the Cepstrum is what stood out to me. As far as I know, the kit only requires soldering the hotswap sockets if the full price is a lil too rich for you. It uses Kailh choc v1 switches but I don’t recommend the ones that you can get bundled with it. Silvers are my go-to choc, and a lot of people in the ergo space like the purpz/pinks because they’re really light.
just thinking about those designs where a case is wanted, but the position of the usb port isn’t ideal. not one of those things that I think is required to make this a great controller option, just something a lot of controllers don’t have and I’ve wanted for a bit.
any chance the D+/- lines are broken out to a couple pins?
I was never officially diagnosed, but I was having so much pain a couple years ago that after a day of work, I’d just go to bed. I picked up a sweep from keebmaker and within just a few days I noticed it was the right way to go. The only time I notice any pain now is after a day of heavy cellphone or mouse use.
broom (of ferris sweep) did a promicro “tribute”. Dunno if they ever actually released it, but it’s up on github: https://github.com/davidphilipbarr/testing-boards/tree/main/gogo-corne
One unfortunate thing about ergonomics is that each persons needs are different. No one can tell you what’s best for you, but luckily we have a lot of good options that help you find what does work for you.
If you’re fine with some soldering, there are a lot of open source splits that you could get fabricated for pretty cheap and end up with two full builds. Cantor, Piantor, Corne, Lily, Sofle, etc etc etc. The low cost of having them fabricated and built yourself can mean trying out a few different keyboards to see what works best for you.
When it comes to gaming, maybe using one keyboard for programming and a different keyboard for gaming. It could be just half of a 4 row split, a gaming focus keypad (like the Eternal) or just your current rowstagger board. I personally use a QAZ-alike I designed as a gamepad.
Tenting can be accomplished multiple ways. Some boards have Tenting Puck support. Some can have large bolts added to adjust the angle. For boards without some native tenting support, many 3d printable cases exist that provide tenting and lately I’ve seen a lot people use the magsafe sticker thingies to attach their keyboards to small tripods.
One reason there are so many options is because it’s pretty easy (and fun} to design your own keyboard. It’s not uncommon to try a few different designs/layouts to see what works best for you from each and then design a keyboard to fit your requirements. Designing your own keyboard comes with it’s own set of information overload, but there are a lot of us around to help us.
If you’re down with DIY and Stateside, hit me up. I’ve got a bunch of PCBs in a box that I can part with for stupid cheap. I’ll need to take an inventory of what I have but if you’re interested I’ll gather up the info. I know I’ve got at least an MX Corne.
Link Dump:
Yeah, lol. Red is one of my least favorite colors.
Nope, they were too red for me. If the crystal reds were 5pin I’d use them a lot more.
Sadly, I don’t think there are any choc boards that fit your requirements. Not many choc boards over 40% and the ones that exist will require soldering of some sort.
GrabCAD is where I usually start my hunt.