For my part, to get Jellyfin to recognize some of my shows/movies properly I had to export the Metadata which properly detected most. If that doesn’t work Jellyfin might be ignoring them due to decoding issues. Would be worth checking the log while rescanning to see if there’s an error or access issue.

I purchased an enclosed rack like this many years ago, but I’m glad I never used it. They are a pain to cool properly. Most of these types of rack will not come fully enclosed, with the front or sides being steel but with air holes for good airflow. The one I purchased was a StarTech.

Racks are usually counted in height by U (unit) which is a standard server height, so look for something in the 12-25U range. https://en.m.wikipedia.org/wiki/Rack_unit

I believe the one I purchased was a 32U with wheels and it was around 1500 USD plus freight (it arrived on a pallet).

What you’re likely looking for is a wall mount rack. Wall mounted racks are going to be the same width (usually 19" 2 or 4-post) but will vary by depth. You won’t be able to put a full length server in a wall mount as it’s designed for half-depth network equipment, but should serve your stated need quite well. 19" shelf mounts are available too.

Some examples: https://www.startech.com/en-us/server-management/rk1232walhm https://www.startech.com/en-us/server-management/cabshelfv

Check the note below that section. It will attempt to unlock all root partitions with the same passphrase entered, so if you setup the second drive with encryption it will unlock alongside your primary drive. With LVM on top you should then be able to expand the VG to the second drive to add space or redundancy to your LVs.

If the second drive has subpartitions (LVM on bottom, encryption on top) it looks like you’ll need additional setup (section 7.2.2) https://wiki.archlinux.org/title/Dm-crypt/Specialties#Modifying_the_encrypt_hook_for_multiple_partitions

The amount of Windows bashing in this thread is hilarious, for what amounts to Enterprise grade DNS-over-TLS with additional whitelisting. Doesn’t help the home user, but likely won’t break home users internet access either.

Perhaps they should ask Copilot how their templating system works.

As an aside, these are the client logs, check the /var/log/ auth.log or secure files or journalctl to see if the server logged why the access was denied.

Not sure about a pure bash solution to call vlock, but screen has the ability to idle timeout and require the password to unlock. Basically in bashrc you would exec screen with the custom config, but only if screen is not already started. The below link has this done in .bashrc and I would recommend testing with a new user account so you can disable it if needed, but this should work in /etc/bashrc or /etc/bash.bashrc as well.

https://www.ateijelo.com/blog/2018/05/02/lock-linux-tty-consoles-on-timeout

The other option to the server that was posted is to get a DAS Enclosure that you can then hook up to a server or anything that can use a SAS/SATA card. These are generally going to be cheap because it is just a SAS/SATA backplane/expander.

Edit: eBay is useless. Here’s an example DAS https://www.aventissystems.com/HPE-MSA30-DAS-Storage-Basic-p/200051.htm

My line of business is entirely a Microsoft shop so everything we’ve ever written has been for MSSQL.

That being said, I can understand the benefits of having a choice in backend. For example, for our Zabbix deployment some engineer just installed mariadb+zabbix on a server and called it a day. This has caused us no end of troubles (ibdata misconfigured, undo files too small, etc). After the last time I had to rebuild it due to undo file corruption I swore that if it broke again I was switching to postgres. So far knocks on wood we haven’t had any major issues. We’re still looking into and planning for a postgres migration but we’re hoping to hold out for a little longer prep time.

Maybe I should contribute a MSSQL engine for Zabbix so I can move it to a platform I’m more comfortable with. ;)

“it compiles, ship it!”

Yes, but as I’ve found recently AES-NI is only as good as your software support for it. Had a team using an ancient version of winscp and they kept complaining about download speeds on our 10Gb circuit. Couldn’t replicate it on any other machine with the newest version of winscp so I installed their exact version. AES-NI support wasn’t added until like 2020 and it gave them 5x better download speed after upgrading.

Does cryptsetup/luks do that? I thought that was only software encryption.

You can, sure, but you probably shouldn’t. Encrypting and decrypting consume additional cpu time, and you won’t gain much in terms of security.

Hover over the window in the task bar and right click on the preview. This should show the restore/minimize/maximize dialog. Click restore if it’s an option then do the same and click move. You should be able to then use the arrow keys and “attach” the window to your mouse and move it to the visible area.

Edit: the other way to get this menu depends on the application but if you select the window and hit ALT and then space it should show the restore/minimize/maximize options.

One of my system engineers started using TFS a few weeks ago. All he knows how to do is click Sync Changes in vscode and call me if there’s a problem.

Avahi uses mDNS which is a multicast protocol. Multicast is designed to be link-local only: it ends at the edge of a broadcast domain. Router A would also need to bridge in order for that to work (i.e. Device A and B would need to have the same broadcast ip).

On the other hand, there are ways of setting up Multicast Forwarding if the router supports it, or you could have a device in both networks that does Avahi/mDNS Reflection.

https://www.cisco.com/assets/sol/sb/Switches_Emulators_v2_3_5_xx/help/250/index.html#page/tesla_250_olh/multi_forwarding.html https://serverfault.com/questions/121032/forward-mdns-from-one-subnet-to-another

Since this is a github pages site, the whole thing can be downloaded from the git repo: https://github.com/xenevel/dark-souls-2-sotfs-cheat-sheet

Easiest is to select the green Code button and click Download ZIP. You should be able to open the index.html page in your browser and use it like normal. YMMV if this uses content/data from other sources/sites.

This looks like a combination of JSONP and the ES2015 computed property name syntax. JSONP is used to load into web pages using a script tag and execute the function (item) with the data, rather than a direct response from Ajax.

As for tools, jq may be able to parse this assuming you remove the item( and the last );

I have used gocryptfs (https://github.com/rfjakob/gocryptfs) in the past, it creates an overlay mount that encrypts each dir and file separately, so no need to precreate a container. There are some security downsides to this approach though so be aware of that. https://nuetzlich.net/gocryptfs/threat_model/

There are 4 pinned posts at the top, should be more posts below that.