Thank you for the idea! Didn’t cross my mind but it does make sense.

You’re very much welcome!

So lets start from the top:

1. All printers have the same precision.

2. I guess you’re talking about input shaping, which reduces artifacts and shaking of the printer (a little)

3. Most budget printers right now have lots of the same creature comforts that this printer has.

Right now the biggest things are community/aftermarket support (moddability), price and firmware. You should get Klipper to get input shaping, so that narrows it down. Look for some klipper printers (e.g. Sovol sv07) and decide which one you like best. They are almost all the same, save for qc and qa issues by some companies and sometimes lackluster support. Any printer can produce awesome prints. It’s only a question of how much time you have to fiddle with the settings. Cheers!

Apple sux ass anyway.

Yiff

Rum coke ftw

Don’t speak for the council, you dog! You liar!

Their fur is wet, needs to dry by a fire.

Pedal to the metal and no distractions. Only the silent rage.

Glass bead thermistors have very fragile wires and sometimes you can’t see a break that has occured. I replaced mine with a cartridge as fast as possible, but good on you for finding and solving the problem.

Dang you must be fun at parties.

I used the windows debloater to remove most telemetry and then shut off services that were left in the task manager until something broke completely. It was a bit of a process but it worked. I use my PC for 3d modeling and gaming. Never used half the integrated apps because I have no need or already have better ones or actually a physical calculator. In general with my PCs I just delete anything that I will never use. Like office for example.

Yeah, i disabled basically all telemetry on windows. I also will never upgrade to 11. It sucks donkey balls. Also I haven’t noticed any change in edge being gone. Maybe I just got lucky.

Forgot to say, I got my keys from a system builder who had a shit ton of them but had to get them off the shelves because windows 11 was around the corner. So they are all legally obtained.

That is exactly why you buy cheap keys for your windows install and remove everything you don’t need. Edge got nuked from orbit by me and most annoying ads disappeared with it. I killed all notifications and I am now much happier.

Umm, ackhchually, the first sperm usually doesn’t get to the egg. It weakens the outer membrane enough for others to try, and whichever sperm gets lucky to finally break through impregnates the egg. The first one is usually out of energy by that point. So you were lucky to capitalize on the work of others. Cheers!

Are you sure? Never got mine :) had to work for every single trophy I got.

Glad it worked out for you. Good luck and happy printing. Send me a message if you need help with the firmware. Cheers.

Marlin is the name of the firmware. It can be configured for any printer. It stands between the cpu of the mainboard and the motion system, telling the cpu what hardware you have and how to use it.

Idk about the extruder, but maybe you should compile marlin from scratch. The display issue seems to indicate that marlin has basically no idea what to do with it. Silent motherboard might not be working, because the hybrid threshold is set too low (e.g. switches from stealthchop to spreadcycle too early) or it just operates in spreadcycle. The probe can also be attributed to bad firmware. If you want to dive deeper or need help, hit me up, we’ll figure it out.

Also PID tune your hotend with this command: M303 E0 C5 S210 U

Maybe you need to dry your filament? Blobs and stringing sound like a water boiling problem.