Kind of difficult to give recommendations on where to start for resoldering, but my first hunch would be cold solder joints somewhere. I have a Kyria from splitkb that I assembled myself that had spotty LEDs on one half which turned out to be a cold joint on one of the surface mount underglow LEDs. Also had no key presses registered on a row that turned out to be a cold joint at the MCU.

As for general troubleshooting recommendations, if you can get a board schematic that would be immensely beneficial for your efforts as it would show how and to what pins of your MCU everything is connected. With that you can try to identify where the fault might be occurring (e.g. LEDs die after LED 5 in the chain) and focus your efforts before/after that area.

Failing the board schematic, you may be able to just visually see where the traces connect back to on the PCB, or you could probe it out using continuity mode on a multimeter and reverse engineer the connections.

Another thing that may aid in diagnosing where the issue lies with the double key presses is figuring out how the key matrix is laid out. For example if you’re receiving double presses on only some keys in a single row or column, the issue lies in either that row/column or the MCU pin they connect back to. Again, the board schematic would be really helpful in this regard.

Best of luck!

Check out Mealie

This appears to be a variation of the “standwich.” Please see the attached for an example.

I loved that book growing up and was so excited when the movie was coming out (on my birthday!)

To this day, that movie is the only one I legitimately walked out of. It was such a terrible adaptation.

Running an RKE cluster as VMs on my ceph+proxmox cluster. Using Rook and external ceph as my storage backend and loving it. I haven’t fully migrated all of my services, but thus far it’s working well enough for me!

Gorgeous cat…but where are the peppers 🤣

Oh yeah…the sounds were something else lol. The technicians gave me earplugs for mine. It is quite a loud procedure strangely enough. The one benefit was that I was able to request the imagery they took on a disc afterwards and then I was able to 3d print my brain from the imagery!

Watching them do the chair was… terrifying… Just seeing the rigging they used stretch and jump up in 200lbf increments gave me sweaty palms.

I had to get an MRI at the start of the year and told them I had metal permanent retainers and was slightly concerned. They were like “Nah, you’re fine.” I was like “Okay, just please don’t steal my teeth 😬”

OSRS?

She turns into such a puddle on the couch

I want to try and create discussion about videos that may be less main stream. Video (specifically medium- to long-form) is my preferred type of content to consume, however I don’t have the ability to create my own content. !Videos@lemmy.world is great but as @kersploosh@sh.itjust.works mentioned below:

Posts that invite comments tend to get comments.

!Videos@lemmy.world doesn’t directly ask for discussion on the videos posted. I created a community, !whatareyouwatching@lemmy.onlylans.io, to try to bridge this gap. The idea is that you find an interesting video, you watch it, and then you post it with your main take-away or a question you had to try and foster a discussion.

Not sure if it is working, but that’s my own methodology to trying to increase engagement with content that I don’t personally produce.

Also, I am running a small self-hosted instance for friends, so my name may not be as “out there” as the larger instances, but I’m pretty sure that anyone can post to this community.

Back when COVID was in its prime, I was contributing CPU/GPU cycles to Folding@Home for protein folding simulations and working on a vaccine. Since then, I’ve reimaged my desktop twice. I should probably reinstall the BOINC client to contribute again…

Looks like blossom end rot to me, my plants suffered from this last year. You should try supplementing with calcium, that’s what I’ve done this year and I have not had this issue.

This video is a must watch for explaining the fundamental problems of crypto/NFTs.

Warning: it long, like feature movie long, but really informative.

Yeah, the whole article feels like it is both pandering and condescending at the same time. No thanks lol.

This article is so cringey.

A modern classic IMO 🤣

No, no you’re totally fine. I agree that “slum tourism” feels bad, and I agree that this video initially strikes as “slum tourism”, however watching additional videos of his I feel like this is less the case. I think that Indigo Traveller seeks to highlight the inequity present in the modern day, and while this is not something that is comfortable, it is something that should be addressed in a forum such as this one.

You brought up “slum tourism”, which I agree is not pleasant, and makes me feel gross to promote (as is the case in this video), however bringing attention to videos such as these can help people be aware of the struggles of others.

This awareness is not a panacea, but rather is the seed of an idea than can attempt to equalize the inequity present in other’s thinking.

Thanks for your input! I’d love to hear more if you’re willing to share.

I don’t know. I feel like perspective is everything, and you seem to have an idea of how things are in Mozambique which is totally fair, whereas I do not. This is a fair assessment, however I feel that the visibility that Indigo Traveller provides into the situation in Mozambique is worthwhile nonetheless.