I would recommend prowlarr instead of jackett for indexer management, and pihole as at least an additional blocking service but in reality it’s really all you need for use at home. I’d also strongly encourage use of a VPN on your *arr download services. I use a separate box to run Plex and then have my *arrs all running on their own VM inside if it to provide separation and allow be to more easily segregate the network traffic (as someone that doesn’t really know docker that well it “just works” for me. Also probably worth looking at how to store your media on an external target, it’s easy to quickly accumulate 10s of TBs of media and trying to store that all on the server locally is asking for trouble. Better to set everything up on a NAS to start.

Asking broadly like this is akin to asking for a guide on how to cook, it’s generally too broad for there to be a single guide. You first need to figure out what your goals are (you state one already, you’d like it to be externally accessible), determine what services you want to host, and then start looking at how to do so.

The advice I’d give is to start with a solid base, you’ll need something to self host on and it really shouldn’t be the PC you use for other things. Get it setup to run a virtualization OS such as proxmox and use that as your starting point. Then do a lot of reading. I spend probably three to four times as much time reading about the service I’m planning to deploy compared to actually doing the work to deploy it. Lastly, plan. You should have a solid plan in the beginning of how you want your service to work (what will be external vice internal only, how will you setup the networking stack to do that, are you going to have a domain, and will you use subdomains or folders to divide services, what does your IP space look like, will you host your own firewall to make the networking more controlled or fight with your ISPs router, do you want to use docker, kubernetes, or maybe full VMs for each service, do you want/need a UI to manage things from or are you comfortable with CLI, etc). These answers will lead you to guides for various services as well as service specific forums where help is more focused.

I grew up in Loudoun county and lived in prince william county for a bit. It’s important to note that the wealth in Loudoun, prince william, and Fairfax counties are concentrated in pretty specific areas. Outside of Ashburn, South Riding, and the western estates of Loudoun it’s not terribly rich. The data centers bring in a ton of wealth though on top of the very large government contracting companies such as Lockheed, Raytheon, GD, etc. Additionally, DC and the surrounding cities just don’t have the density like other cities do, which spreads the wealth out a bit more (while still concentrating it in various counties around the area).

I’ve also never paid for a library card and I live in the US, so it’s clearly not always America. In fact most commenters here are noting they are paying small fees in euros so it seems this trend is common in Europe more so.

So I think the the big questions you need to answer before moving forward getting engineering quotes is what would you do with the space, how much is that worth to you, and are you in a position to take in the additional costs if it’s on the high end of what you consider worth it.

Even if it adds $100k of equity to your home, if you can’t afford to take on the debt, or have no real use of it beside adding square footage then it may not be worth the initial exploratory costs. On the same hand if you want more room for an office, kids room, etc, and are in a place to take on the extra costs then I’d call an engineer or three and ask about their costs and process.

I use protonmail with their family plan, it’s not terribly priced when you consider it comes with calendar, vpn, and drive storage as well. The biggest annoyance is probably that you have to use their mobile apps due to the encryption and they are not the greatest, but it does encrypt everything which I find outweighs the forced use of just their app.

You want to insulate first, otherwise anything else you do is just going to be pushing heat through your exterior walls. You should be able to get spray in insulation in those walls without needing to full tear down the drywall. Typically you’ll get a 1-2” hole on the top and bottom of each stud bay for foam to be sprayed in, then you patch that. It can be pricy up front but should pay off super quick if you have none right now (I’m still getting over 3,000 kWh… that just seems like an insane amount of electricity to use).

A mini split likely won’t help, you’ll just lose the cooling without insulation the same as without the mini split. You may want to look into balancing your ducting once you get the house insulated if you still have rooms that are too hot or cold. The bricks should help to stabilize temps and reduce swings over time but the effect is likely small and should be able to be ignored once you insulate.

It replaces the ad revenue the channel would otherwise have gotten from your view, at a higher rate than an ad impression.

Curious about the ears you have on your 8 port POE switch; I’d love to rack mount mine and get it off my “other stuff” shelf. Are they from UI? Or did you repurpose some from something else?

Not all modern furnaces and water heaters pull in outside air. Less expensive gas furnaces may still use interior air for combustion and almost all gas water heaters will. Heat pump water heaters absolutely need ventilation to work correctly as well.

Food theory covered this in terms of Christmas trees. The answer is yes, mostly, with a lot of caveats, and also probably not really.

So you never apply patches or updates, that seems like an odd thing to be proud of but different strokes for different folks I guess.

Backblaze B2. Any software that is S3 compatible can use B2 as the target and it’s reasonably priced for the service. I backup all the PCs and services to a Synology NAS and then backup that to B2 (everything except my Plex media, that would be pricy and it’s easy enough to re-rip from disc if needed).

The problem I have is there is no way to playback live tv on AppleTV which is what we use throughout our home. Plex just works and has wife approved first party apps for pretty much everything.

This is pretty much it, Plex offers far more client apps that are full featured and they make it super easy to setup and use both as an admin and a user. Especially for things like OTA TV where they provide the guide data once it’s setup (which is why it’s a paid option). I’d move to JellyFin in a heartbeat if they’d support OTA and DVR playback on AppleTV.

Paper goods meaning napkins, paper plates (mostly for food prep), paper towels, etc. agreed 100% on actual paper for writing.

In most companies I’ve worked for, T1 is there to put in tickets from calls, and handle the simplest of tasks (password resets, account lockouts, “have you tried turning it off and on again” tasks). Anything beyond that is generally sent to T2 (usually the desktop team who then force other teams to accept tickets as needed) and T3 for anything that more systemic or needs deeper troubleshooting and system knowledge.

In many places it’s a combination of piss poor pay creating little motivation and high turnover (and thus lack of training) and management prioritizing the wrong metrics (generally looking for short call times and short call queues). If you want to try and improve things I’d suggest learning about the KPIs that team is expected to meet, and then ask management why they chose those metrics. Generally I’ve found prioritizing first call resolution over call times to be a huge improvement to motivation of the team and user satisfaction scores (we all like solving problems and users tend to be way nicer when you fix the issue vice kick the can).

I would say, at least to your point about them not having access to systems, that’s it’s very common for T1 to have pretty limited admin access to systems. Partly to protect against inexperience, but also as a social engineering protection. If they need to ask for access to pass a ticket for elevated rights, it gets another set of eyes on the call to ensure it’s all kosher.

• Almost all paper goods, specifically Kirkland brand.
• Canned veggies are all the same as well, so whatever’s cheapest
• most dried herbs and spices
• staples like flour, butter, sugar, oil, etc. they are basic and as long as you are getting the kind you need (like AP flour or dark brown sugar) there isn’t any room for differences that the average consumer could notice anyways

If you hit the little icon in the upper right it will mark all unread items as read.

Originally the devs were aiming to bring it to android, but due to limited time and only haven’t iOS devices to test with they’ve shifted to only aiming for iOS releases at this point. It may come to Android at some point in the future but it’s not really in the roadmap at this point.