• Drudge@lemmy.worldOP
    link
    fedilink
    English
    arrow-up
    2
    ·
    1 year ago

    Thanks for the recommendation… Do you have a link to a good one? Seems like there’s a ton of option on Amazon.

    What’s the benefits of a direct drive?

    • j4k3@lemmy.worldM
      link
      fedilink
      English
      arrow-up
      4
      ·
      1 year ago

      Direct drive requires less retraction by like an order of magnitude which speeds up printing. There isn’t the tension that builds up like a spring in the Bowden tube.

      The precision of the extruder components is really important. The Bowden setup is less critical to an extent. This guy explains the issues really well here:

      https://piped.video/watch?v=c6JmCdovE0U

    • Flaky_Fish69@kbin.social
      link
      fedilink
      arrow-up
      1
      ·
      1 year ago

      dd’s give better retraction and can offer better precision, especially with flexible filament

      Bowden can print much faster because the print bead weighs substantially less and introduces less patterning

    • 𝑔𝑎𝑙𝑎𝑥𝑖@lemm.ee
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      I also recommend the trianglelab BMG extruder from aliexpress. They’re the king of clones. Otherwise, just go for anything with a good amount of reviews on amazon. They aren’t too expensive. Most of us who’ve been printing long enough have a drawer full of extruder parts :p

      Direct drive not only lets you print with flexible filament and more precision like the others mentioned - but I also prefer it to bowden because over time, the tubing will get melted and you’ll need to snip off the end. With direct drive, it’s usually only an inch of tube that you can just replace. With bowden, you can end up either decreasing your hotend’s reach (tube gets too short) or have to buy and install a whole new length. Plus, direct drive means faster reload time, less things going wrong. You may just need to get a light stepper motor or compensate other ways with direct drive, as the main downside is the potential for ringing due to a heavier hotend. I don’t notice it much, but that would be the trade off.