• ℛ𝒶𝓋ℯ𝓃@pawb.social
      link
      fedilink
      arrow-up
      8
      arrow-down
      2
      ·
      8 months ago

      Yes, but those don’t work for heavy applications like this. They usually have a weight rating, one well under a full rack of clothes… Just put it into the wall studs, it’s easy enough.

      • ladicius@lemmy.world
        link
        fedilink
        arrow-up
        10
        ·
        edit-2
        8 months ago

        Well please excuse my German stubbornness… The drywall anchors (thanks @stevehobbes@lemm.ee for the word) I know and often installed were certified up to 40 kilogram - per anchor (single layer drywall, one anchor per meter as a rule of thumb). A rack full of stuff like in the picture won’t have more than 50 kilogram load (static load - please tell your kids not to climb onto the shelves) so two such anchors would have handled that easily, and there’s plenty of room to install more than two.

        I understand that other parts of the world live up to other standards.

        • onlym3@lemmy.world
          link
          fedilink
          arrow-up
          4
          ·
          8 months ago

          Agree - have previously fixed a wooden bed frame to drywall using 4 such anchors with no problems. Not as daft as it sounds - it was probably only supporting 20% of the bed and the weight on it, so unlikely to reach 100kg even with 2 people in/on the bed!

      • yukichigai@kbin.socialOP
        link
        fedilink
        arrow-up
        3
        arrow-down
        1
        ·
        edit-2
        8 months ago

        I said it elsewhere, but there are wall studs in that wall. Not a single screw in a single wall stud. Just… why? Argh.

    • yukichigai@kbin.socialOP
      link
      fedilink
      arrow-up
      5
      ·
      8 months ago

      Yeah, but there are wall studs they could’ve screwed into right there. Even if they’d done it “properly”, why not use the more reliable option?

  • dumdum666@kbin.social
    link
    fedilink
    arrow-up
    8
    arrow-down
    1
    ·
    8 months ago

    There are ways to attach shelves to drywall alone, that can hold quite many kilograms. How were the shelves attached and how much stuff have you put on there?

    • yukichigai@kbin.socialOP
      link
      fedilink
      arrow-up
      3
      ·
      8 months ago

      They used cheap plastic drywall anchors, the kind that split into two small “half-rods” (for lack of a better term) when you screw in. The problem is the anchors are plastic and the plastic bends pretty easily, so the load isn’t really distributed much at all. If you look at the holes near the bottom of where the shelf was that’ll give you an idea of how little they spread out.

      As for how much stuff, a handful of boxes with things I access semi-frequently, mostly game controllers, network cables, extension cords, so on. No books or anything. Far less than I’ve put up in other places I lived at actually. More to the point, far less than what the previous occupant had up there (we helped move out her stuff).

  • SARGEx117@lemmy.world
    link
    fedilink
    arrow-up
    4
    ·
    8 months ago

    My parents bought a house a couple years ago, and the previous owners thought it would be okay to put a wall in by screwing 2x4s into the existing drywall of the adjacent walls and putting the sheets up on either side of the 2x4.

    They also thought that nobody would notice the fresh paint and fresh plywood used to cover up massive amounts of mold, and when it was discovered after the first day they shrugged and went “oh we had no idea” and a judge believed them.

  • BoneDemonBoofer
    link
    fedilink
    arrow-up
    2
    ·
    8 months ago

    I discovered the same thing when I moved into my place and started unpacking all of my dishes and glasses into the cabinet above the sink…

  • 6daemonbag@lemmy.dbzer0.com
    link
    fedilink
    arrow-up
    1
    ·
    8 months ago

    This happened to me when I bought my first house. Came home to clothes all over the place due to cheap plastic anchors. So annoying to fix, and a sign of other problems to come. Lazy contractors gonna lazy

    • yukichigai@kbin.socialOP
      link
      fedilink
      arrow-up
      1
      ·
      8 months ago

      No idea, though hopefully not too much. I’m not really worried about the appearance of the wall so it’ll mostly come down to what it takes to mount a new shelf and hanger rod. So long as the wall studs are positioned well on the sides I can probably manage that myself.

  • yukichigai@kbin.socialOP
    link
    fedilink
    arrow-up
    1
    ·
    8 months ago

    Just as an update to this for anyone who cares, in taking out the remains of the shelving I discovered that the position of the crossbeams is adjustable, and they could’ve been shifted over and screwed into the wall studs. Instead they used more split-style drywall anchors.

    That said, it looks like there were some parts screwed into the wall studs: three small hooks made of a different material that finally snapped after however many decades of use. Amazing that only three of them held it up for that long.

    I swear, the replacement shelving is going to be so overdesigned…