Relied on an AUR package for building and signing my unified kernel image… one day it was outdated and geberating the image failed, I noticed that by the fact that the system refused to boot my OS. Fixing it was done in a few minutes but boy, that was a shock :D
Guess who also checks the exact output of the kernel rebuild now before rebooting!
This will help: https://wiki.archlinux.org/title/Dual_boot_with_Windows
Applies to PopOS the same way, except for installation steps involving pacman. I’d revommend going with systemd-boot instead of grub, not sure what Pop ships.
Not just Dell… bought an HP Elite x360 in 2018 and it had to go back twice too; first time because they jammed a physical blocker for non-LTE models into my sim slot (then sent it back after removing it and putting the same blocker back in, afterwards gave me free on-site repair for this issue, fucked up my board during that and came back next day with a replacement board) and second time because the keyboard died after a year. Solid ever since, still running perfectly but these initial issues should not happen with a 2500€ device.
By that logic, upvoting posts is equally as “repressive” as downvoting as it decreases the relative visibility of all other comments, I hope that angle shows the stupidity of that argument. I think we have a fundamental difference in understanding censorship, freedom of speech and intolerance here. If you want to play the self-victimization game, please do so on Reddit and not in the linux community on this platform.
“Do folks in here are really that needy of self-validation, even if it means seeking such from something completely insignificant like internet points?”
But… is that not exactly the description of somebody who complains about downvotes?? As said by others; they should be considered exactly as valid as upvotes. If you feel like they prohibit you from voicing an opinion, I personally feel like that is a you-problem. Ask yourself of the content you posted is crap, if you feel it is not, simply ignore the downvotes and move on, they are just pixels.
Edit: I checked your posts, most downvoted ones seem to be clickbaity or images that you posted to the linux community. This is not something that vibes with that type of community, I would have downvoted that too. The ones on your technical questions seem unjustified however. Posting a code snippet asking people to execute it… I think that crap should even have been deleted by mods.
Always reminds me of the console wars… people attach their whole identity to all kinds of things nowadays and fight for it like it was a religion. Did not see much good come out of such threads yet.
Let me raise a side concern here since the core questions already seems to be answered; reconsider the Nvidia GPUs. Depending on what you do, you might encounter significant shortcomings at the moment since they do not play perfectly with Wayland yet (which is clearly the future). So do some research in this direction first before you pull the trigger.
Okay, fair point, so it is relevant for a current issue
This article is from July 2021. Why exactly are you sharing this?
This is one of the reasons why I am very unsure about the whole archinstall thing. On the one hand, it lowers the barrier of entry for less techy people, which is always good. On the other hand, it allows for installing the OS without ever having to use the archwiki, which leads to people making a blog post like this that could be solved by looking for “bluetooth” in the archwiki and following the instructions. To somebody not familiar with the OS, this makes it seem like arch is much more complicated than it actually is. “To run arch, you have to hope that there is a blog post or youtube video for simple things like bluetooth!”
No, you simply go here: https://wiki.archlinux.org/ (Also very useful resource if you are on any other distro btw)
Sorry, saw the reply just now. I use Wayland pretty much exclusively since I switched all my devices to Linix roughly three years ago and I face no issues. Afaik sway is fully compatible with i3 config, so I assume your gestures should just work the same. Hyprland is a different beast, it is still pre-release, so while the state is impressive, do not expect super advanced niche features like gestures (check their wiki to see if they are supported). I don’t use an OSK, whenever I fold, I pretty much use only xournal++ which I navigate with pen and touch. However, there is at least one that I tinkered with some months ago and it worked, I cannot remember the name though (probably got it from the arch wiki). Lid switch detection works well in sway, so I assume configuration for it to come up automatically should be trivial. Again, definitely try sway first, this should give you the best experience. Hope it helps!
Running an HP Elite x360 1030 G2 since 2018 and an Elite Dragonfly since last year, both on Arch linux and Sway (recently Hyprland) with full touch and pen support. Can recommend both!
Very true also for the opposite direction; I am daily driving an HP Elite Dragonfly for work and my Elite x360 1030 G2 for private and both work almost flawlessly despite no official Linux support. I have to disclaim that I never tested the Fingerprint reader or IR face recognition crap. But microphone, orientation sensors, webcam, keyboard, trackpad all work extremely well (Arch linux).
It always comes down to the individual hardware it seems.
Tge easiest way is probably to change the port of the Pihole config page
Let me add another important point: outsourcing responsibility. In case of a data breach, you have someone to sue and you don’t need a whole internal team to be up to date on the latest security topics. Instead, they just have to be able to manage the web interface (not saying that is easy, just less subject to changes)
Ran into this some time ago and learned that there is a more rudimentary command adduser instead but it does not do things like home folder creation
It is only important when you want to connect displays to the dock, if that is not your use case, any travel dock for 40 bucks will do :)
Main reasons I see being raised a lot are Canonical’s absolute control over the snap ecosystem and the dependency problem inside the snaps, meaning they often ship outdated versions of dependencies which might have known bugs or flaws.
The fact that it is forced on users is mentioned by other people here already. Afaik this is not a thing yet on Ubuntu server, so maybe install that one + the GUI packages? Not an Ubuntu user myself, so this could be oversimplified.
You are totally right to be confused, the USB naming is a total mess. A quick Google search told me that your two ports are Thunderbolt4, another thing to mix in. TB4 to my knowledge integrates USB4, so you can basically connect anything that is USB2,3,4 or Thunderbolt3 or 4. Luckily, none if that matters for your use case, pretty much all proper docking stations support charging (usually the functionality is listed explicitly on the docking station description), so you can probably choose almost any. If you go with one of the big laptop manufacturer’s product (Dell, HP) it is pretty much guaranteed to work. Personally, I use HP’s Thunderbolt 3 dock for my gf and HP’s universal Thunderbolt Dock for myself across my work and private devices. Even works on my android phone!
Did you take a little journey into the BIOS yet? Is definitely firmware, the question is if you can just change a setting there. Otherwise, somebody already mentioned dummy HDMI plugs.